Luxury Warm Floors Now Affordable

The Warm Solutions floor heating kits are ideal for both renovations and new builds, and is suited for most hard floor surfaces, including tile, stone and timber laminate. Easy to install and simple to use, the floor heating kits are an affordable way to add a luxury touch and value to your home.

The floor heating kits are are supplied with all the measuring work and cold tail connections sealed and tested for you.

The floor heating cable is pre-configured in mat form, ready to roll out and lay on the floor. You do not need to string out, cut or fit off cold tails (splice) any heating cables. Simply connect the heater element monitor to the cold tails, stick the underfloor heater to the subfloor with the self-adhesive tape then roll out and position the self adhesive fibreglass mesh over the heater, before laying the final floor finish.

The Warm Solutions Advantage

1mm thin heating element does not affect floor levels - perfect for renovations
No screeds required - the 1mm heating element does not affect the floor levels
Save time on installations as there is no stringing out of heating cables from a roll and measuring spacings between heating cables
Factory terminated cold tail connections are guaranteed waterproof.
Floor heating elements and cold tail heating elements are fully earthed and waterproof and safe for wet areas
The range of heater sizes and shapes accommodates any room size or shape

Quick and Easy Installation

Benefits of Warm Solutions Floor Heating Kits

Maintenance free
Energy efficient
Suited for new homes and renovations
Suited for most hard floor finishes
Safe for wet areas
Telephonic support
Installation support
Automated comfort control with standard digital programmable thermostat (optional)

Estimated running costs of a 440W floor heating system connected to a digital programable thermostat with floor probe sensor is 2.6c per running hour (based on 15c per kW/h & a duty cycle of 40%).

Warm Solutions Kit Contents

Pre-measured floor heater
Cold tail lead factory terminated
Self adhesive fibreglass mesh
Heater element monitor
Installation guidelines
Operating instructions
Telephonic support
5 Year product guarantee

440W Heater Technical Specifications

Voltage: 230V
Wattage: 440W
Element diameter: 1mm
Mat size: 7.92 x 0.30m
Floor area coverage: 2.8 - 3.4m²

Floor heating is classified as an appliance and can be installed by any competent person. The heater must be connected to a RCD (safety switch) protected circuit by an electrician. All wiring must conform to AS/NZS 3000:2000 and local wiring regulations.